Technical Information
61
5.22 Brew Unit - Installation
1. Remove the Waste Container.
2. Slide the Brew Unit into position in the appliance until the
locking mechanism engages with the drive mounting plate.
Note
Do not press the part marked PRESS during the installation of the
brew unit.
5.23 Brew Unit – Cleaning Procedure
Note
- Clean the Brew Unit by hand only, it SHOULD NOT be cleaned
in a dishwasher.
- Lubricate the Brew Unit with silicon every 500 cups
1. Remove the Waste Container.
Note
The Brew Unit can only be removed after the Waste Container
has been removed from the appliance.
2. Grasp the brew unit by the handle and press with the thumb on
"PRESS". (Figure 5-19, Item 1).
Figure 5-19: Brew Unit – Removal for Cleaning
3. Pull outward to remove the Brew Unit (Figure 5-19, Item 2).
To Next Page
Loading...
Need help?
General
