Technical Information
67
5.28 Brew Unit Creamer Valve - Removal
1. Remove the Brew Unit
2. Remove the output fixing screws.
3. Remove the output.
4. Remove the spring and Creamer Valve.
5.29 Brew Unit Handle - Removal
1. Remove the Brew Unit from the appliance.
2. Press the handle retaining lugs inwards (Figure 5-26).
3. Remove the handle.
Figure 5-26: Brew Unit; highlighting the output assembly (covering the Creamer
Valve) and retaining lugs for securing the handle to the Brew Unit body.
To Next Page
Loading...
Need help?
General
