Installation
174
Installing the steam oven
A fault can occur if the appliance is
not correctly aligned.
For correct functioning of the steam
generator, please make sure that the
appliance is horizontally level.The
maximum deviation should not ex-
ceed 2°.
Push the appliance into position in
the niche and align it. Make sure that
the power cord and water intake and
drain hoses do not get pinched or
damaged when doing so.
Secure the appliance left and right
using the screws supplied 1/8" x
1" (3.5mm x 25mm) to the sides of
the unit, as illustrated.
Connect the appliance to the electri-
cal supply.
Check the appliance for correct func-
tion in accordance with the Operating
Instructions.
To Next Page
Loading...
Need help?
General
