Operation: Functions without steam
49
The grease filter on the back wall
must be removed for baking as this
can result in uneven browning.
Quck guide
Remove the grease filter from the
back wall
Turn the steam oven on .
The main menu appears on the display.
If you wish to cook with bursts of
steam, fill the water container and
push it back in so that it engages.
Insert the roast probe if required into
the food (see "Roast probe").
Put the food in the oven.
Select Operating Modes.
Select the desired mode.
When the mode is selected, the follow-
ing will appear in the display:
– Temperature or Level
– Core Temp.
This option only appears when you
are using the roast probe.
– Additional Settings
Alter the recommended and/or core
temperature or level if necessary.
The recommended temperature will be
automatically accepted within a few
seconds.
If required, select Change to go back
to the temperature selection option.
Set additional settings as necessary,
e.g. setting a cooking duration (see
"Advanced functions").
Confirm with OK.
The cooking program will start. The
oven heating, lighting, and fan will
switch on.
After cooking
Remove the food from the oven.
After each use, clean and dry the
whole appliance as described in
"Cleaning and care."
Turn the steam oven off .
Leave the appliance door open until
the oven interior is completely dry.
To Next Page
Loading...
Need help?
General
