7. R/C function settings
R/C function settings cover the following items. These settings can be done only when the unit is stopped.
(1) Main/Sub of R/C: Set the main or sub R/C . ➝
⑧
(2) Return air temp: Set the detection method of return air temp for applying to thermo. rule*. ➝
⑨
(3) R/C sensor: Set the operation mode to apply the temp detected with R/C sensor to thermo. rule*. ➝
⑩
(4) R/C sensor adjustment: Adjust the temperature detected with the R/C sensor. ➝
⑪
(5) Operation mode: Set Enable/Disable for each operation mode. ➝
⑭
(6) °C/°F: Set which of °C or °F is used. ➝
⑮
(7) Fan speed: Changes the fan speed. ➝
⑯
(8)
External input: Set the range to apply the external input (CNT) connected to plural indoor units.
➝
⑰
(9) Ventilation setting: Set this when a ventilation device is connected. ➝
⑱
(10) Flap control: Set one of 4 flap stop positions or free flap stop. ➝
⑲
(11) Auto-restart: Set Enable or Disable of Auto-restart function. ➝
⑳
(12) Auto temp set: Set Enable or Disable of Auto temp set function. ➝
(13) Auto fan speed: Set Enable or Disable of Auto fan speed function. ➝
* “Thermo. rule” means the “Judging to make thermostat ON or OFF” by detecting temperature.
①
Tap the
Menu
button on the TOP screen.
②③
Main menu screen is displayed.
Tap the “R/C function settings” button on the menu screen.
①
TOP screen
②
Menu screen
③
Menu screen #2
To Next Page
Loading...
Need help?
General
