Save IU settings
All settings of IUs connected to the R/C are saved in the R/C.
Automatic saving
Set the time when the automatic saving is performed everyday.
If the [No setting] button is tapped, the automatic saving is not performed.
Select IU
Transfer the saved data
IU setting data saved in the R/C are transferred to IU.
If an IU to which the saved date is transferred is selected, the Transfer the
saved data acknowledge screen is displayed. Tap
Yes
to transfer the data.
IU setting item for saving
High ceiling
Fan control in heating thermo-OFF
Control pressure adjust
Filter sign Anti-frost temp Auto operation mode
External input 1 Anti-frost control Thermo rule setting
External input 1 signal Drain pump operation Auto fan speed control
External input 2
Residual fan operation in cooling
Individual ap control
External input 2 signal
Residual fan operation in heating
Heating thermo-OFF temp adjustment
Intermittent fan operation in heating
Return air sensor adjustment Fan circulator operation
Save IU settings
Automatic saving
Select IU
Transfer the saved data
To Next Page
Loading...
Need help?
General
