−49−−48−
Select the language
Select the language to be displayed on the R/C.
【Selecting the language with the
Select the language
button】
1
Tap the
Select the language
button on the TOP screen while the air conditioner is stopped.
■Depending on how the Permission/Prohibition setting (☞
Refer to user’s manual.
) is set, the administrator password input screen may be
displayed.
2
The menu for select the language is displayed.
Select the language to be displayed on the R/C and tap the
Set
button.
Y
ou can select from the following languages:
English/German/French/Spanish/Italian/Dutch/Turkish/Portuguese/Russian/Polish/Japanese/Chinese
【Starting control with
F1
or
F2
switch】
Change the
F1
(
F2
) switch function to the silent mode control in the
F1
(
F2
) function setting.
When you press the
F1
(
F2
) switch, the administrator password input screen is displayed. After you enter the password, the silent mode control will start.
To terminate the silent mode control, press the
F1
(
F2
) switch again.
■This operation is to select enable/disable of silent mode control. You cannot start the operation with the F1
(
F2
)
switch during stop. Start the operation with the
Run/Stop
switch.
【Selecting the language with the
Menu
button】
1
Tap the
Menu
button on the TOP screen and select
Useful functions
⇒
Select the language
.
■Depending on how the Permission/Prohibition setting (☞
Refer to user’s manual.
) is set, the administrator password input screen may be displayed.
2
The menu for setting the language selection is displayed.
Select a language to be displayed on the R/C and tap the
Set
button.
3
During silent mode control, “Outdoor unit silent mode control ON” will be displayed on the message display.
■Silent mode control will not be disabled even if you press the
Run/Stop
switch.
■When the sub R/C is set, the silent mode control cannot be used.
■During silent mode control, operation with maximum capacity is not allowed.
PJZ012A180_EN.indd 49 2019/03/29 11:33:44
To Next Page
Loading...
Need help?
General
