Mitsubishi Lancer Evolution VI User Manual

SRS – SRS-ECU
52B-24
SRS AIR BAG CONTROL UNIT (SRS-ECU)
Caution
1. Disconnect the battery (–) terminal and wait
for 60 seconds or more before starting work.
Furthermore, the disconnected battery
terminal should be covered with tape to
insulate it. (Refer to P.52B-3.)
2. Never attempt to disassemble or repair the
SRS-ECU. If faulty, replace it.
3. Do not drop or subject the SRS-ECU to
impact or vibration.
If denting, cracking, deformation, or rust
are discovered in the SRS-ECU, replace it
with a new SRS-ECU. Discard the old one.
4. After deployment of an air bag, replace the
SRS-ECU with a new one.
REMOVAL AND INSTALLATION
Pre-removal Operation
D Turn the ignition key to the LOCK (OFF) position.
D Negative (–) battery cable connection
1
4.9 Nm
Removal steps
D Floor console
1. SRS-ECU
Installation steps
"BADPost-installation inspection
D Negative (–) battery cable connection
"AA 1. SRS-ECU
D Floor console

Mitsubishi Lancer Evolution VI Specifications

General

Brand	Mitsubishi
Model	Lancer Evolution VI
Category	Automobile Parts
Language	English