Mitsubishi Q02HCPU User Manual

5
MEMORIES AND FILES HANDLED BY CPU MODULE
5.2 High Performance Model QCPU, Process CPU and Redundant CPU
5.2.8 Execution of standard ROM/memory card programs (boot run)
5
- 43
1
Overview
2
Performance Specification
3
Sequence Program Configuration and Execution Conditions
4
I/O Nunber Assignment
5
Memories and Files Handled by CPU Module
6
Functions
7
Communication with Intelligent Function Module
8
Parameters
5.2.8 Execution of standard ROM/memory card programs (boot run)
This section explains how to operate the programs stored in the standard ROM or memory
card.
(1) How to execute the standard ROM/memory card programs
The CPU module operates the programs stored in the program memory.
It does not operate the programs stored in the standard ROM or memory card.
To do this, make setting to boot (read) the programs in the standard ROM or memory
card to the program memory at power-on or reset.
( (2), (3) below)
The programs having the file names specified in the boot file setting are booted from
the standard ROM or memory card to the program memory at power-on or reset.
(2) Procedure before boot run
The following describes the procedure before boot run.
(a) Program creation by GX Developer
Create programs for boot run.
Diagram 5.33 Boot run
Program
memory
Boot
Memory card
Boot
Standard
ROM

Mitsubishi Q02HCPU Specifications

General

Power Supply	24 VDC
Number of Connectable I/O Modules	Up to 64 modules
Operating Temperature	0 to 55 °C
CPU	Q02H
Number of I/O Points	4096
Communication	Ethernet, Serial
Operating Humidity	10 to 90% RH (non-condensing)
Type	MELSEC-Q Series High Performance Model Q02HCPU