Motorola APX Series User Manual

6.1.1
Using ViQi Virtual Partner
Prerequisites: See ViQi on page 38 for the queries supported by this feature.
Procedure:
1 Press and hold the assigned ViQi button.
2 After you hear a tone, speak your request into the microphone.
3 Release the assigned programmable button and wait for ViQi to respond.
4 Throughout your session, repeat steps step 1 through step 3 when responding to ViQi.
Depending on your query, you can also say the following requests:
• To play the available results, say "Play results".
• To request for more details, say "More details".
• To complete the Virtual Partner session, say "Complete".
6.2
Advanced Call Features
This chapter explains the operations of the call features available in your radio.
6.2.1
Calling a Phone Not in the List
Procedure:
1
or to PHON.
2 Press the Menu Select button directly below PHON.
3 Enter the desired phone number on the keypad.
The display updates as the numbers are entered.
4 Press the button or the PTT button on the keypad microphone to make the call.
5 Press and hold the PTT button to talk. Release the PTT button to listen.
6 Press or Menu Select button directly below PHON to exit.
6.2.2
Selective Call (ASTRO Conventional Only)
A Selective Call is a call from an individual radio to another individual radio with privacy.
6.2.2.1
Receiving a Selective Call
When and where to use: When you receive a Selective Call, you hear two alert tones and the yellow
LED illuminates while the green LED blinks. The call received icons blink and the display alternates
between CALL RECEIVED and the home display.
The speaker unmutes.
Procedure:
1 Hold the microphone vertically 1 to 2 inches (2.5 to 5.0 cm) from your mouth.
6875947M01-HM
Advanced Features
39

Motorola APX Series Specifications

General

Brand	Motorola
Model	APX Series
Category	Two-Way Radio
Language	English