3 Press the Menu Select button directly below PIN.
A blinking cursor appears beside PIN.
4 Enter your Personal Identification Number (PIN) number.
The maximum PIN length is four digits. The PIN number appears as asterisks.
5 Press the Menu Select button directly below LOGN.
One of the following scenarios occurs:
• In ARS Server Mode, the display shows the User Login Indicator icon, the ID, and IN
PROGRESS, with CNCL .
• In ARS Non-Server Mode, the display shows the User Login Indicator icon, the ID, and
LOGGED IN, with LOGT and EXIT.
• In non-ARS enabled mode, the display shows OFFLINE, with LOGT and EXIT.
One of the following scenarios occurs:
• If the user name is invalid, login fails and the user login failure indicator (IP indicator) icon blinks.
The display also shows momentary LOGIN FAILED.
• If the PIN is invalid, login fails and the user login failure indicator (IP indicator) icon blinks. The
display also shows momentary LOGIN FAILED.
• Wait for the logged in confirmation screen. If the login process is successful, the display shows the
successful user login indicator (IP indicator) icon and LOGGED IN, with LOGT and EXIT.
NOTICE: To cancel the login process and return to the initial user login screen, press the Menu
Select button directly below CNCL.
6.10.2.2
Logging Out
Prerequisites: Once the data application registration is completed, you can log out.
When and where to use:
NOTICE: Private data refers to all messages in the text messaging Inbox, Draft, and Sent
folder. The next user is able to access the Inbox, Draft, and Sent messages if private data is
not deleted.
Procedure:
1 or to LOGT and press the Menu Select button directly below LOGT.
The display shows the User Login Indicator icon and CLEAR PRIVATE DATA?.
2 Perform one of the following actions:
• Select YES to clear all your private data. The display shows momentary PRIVATE DATA
CLEARED.
• Select NO to keep your private data.
6875947M01-HM
Advanced Features
65
To Next Page
Loading...
Need help?
General
