2 Press and hold the PTT button to talk. Release the PTT button to listen.
NOTICE: If you press PTT button before pressing the Menu Select button directly below
CALL, your conversation is heard by all members of the talk group.
If 20 seconds pass before you press the Menu Select button directly below the CALL,
you are not responding privately to the call just received. Instead, you initiate a Selective
Call. See Making a Selective Call on page 40.
6.2.2.2
Making a Selective Call
Prerequisites: Your radio must be preprogrammed for you to use this feature.
Procedure:
1 Perform one of the following actions:
• To access this feature by using a preprogrammed button, press the preprogrammed
Selective Call button to dial the preprogrammed ID. Proceed to step 3.
• or to CALL, and press the Menu Select button directly below CALL.
The display shows the last transmitted or received ID.
2 To select the required ID, perform one of the following actions:
• Press the Menu Select button directly below CNTS to scroll through and select the required
ID.
• Press the Menu Select button directly below LIST to go to the last number dialed.
• or to the required ID.
• Use the keypad to enter the required ID.
3 Hold the microphone vertically 1 to 2 inches (2.5 to 5.0 cm) from your mouth.
4 Press and hold the PTT button to start the Selective Call.
The display shows the ID of the target radio.
5 Release the PTT button to listen.
6 Press
to return to the Home screen.
If you do not press button to hang up, your radio remains in Selective Call state with the
other unit. You will miss all subfleet traffic and incoming phone calls.
6.2.3
Talkgroup Call Feature (Conventional Only)
This feature allows you to define a group of conventional system users so that they can share the use
of a conventional channel.
NOTICE: Encryption keys are associated to talkgroups. When talkgroups are associated,
encryption keys are changed by changing the active talkgroup. See Secure Operations on page
73 for more information.
6875947M01-HM
Advanced Features
40
To Next Page
Loading...
Need help?
General
