6.9.11.2
Exiting Impact Detected Condition
When and where to use: If there is a false alarm or you do not want to enter into Emergency mode,
you can exit the Impact Detected condition and prevent emergency from going off. Returning to normal
operations resets the Impact Detected condition.
Procedure:
Perform one of the following actions:
• Press the preprogrammed CLEAR button to exit.
• Press the Menu Select button below CLR to exit.
6.10
Automatic Registration Service
Automatic Registration Service (ARS) provides an automated data application registration for the radio.
When you turn on the radio, the device automatically registers with the server. Data applications within
the fixed network determine the presence of a device on the system and send data to the device.
The ARS for the radio consists of two modes:
• ARS Server Mode (default mode)
• ARS Non-server Mode
6.10.1
Selecting or Changing the ARS Mode
When and where to use:
The following methods are options on how to select or change the ARS Mode. The result of all the
methods is the same. You can use the options interchangeably depending on your preference and the
programmed functions.
Procedure:
• Selecting or Changing the ARS mode using the radio menu:
a. Press and hold
or to CHAN .
b. Press the Menu Select button directly below CHAN .
The display shows the current zone is not blinking, and the channel is blinking.
c.
or or rotate the Mode Knob to the desired channel.
d. Press to confirm the displayed zone and channel.
One of the following scenarios occur:
• In ARS Server Mode, the display shows the User Login Indicator icon, the zone, and ARS
server channel.
• In ARS Non-Server Mode, the display shows the User Login Indicator icon, the zone, and
ARS non-server channel.
• If the channel or mode selected is unprogrammed, the display shows UNPROGRAMMED.
• Selecting the ARS mode using the Mode Knob :
6875947M01-HM
Advanced Features
63
To Next Page
Loading...
Need help?
General
