6 Utilize the following control buttons or menu to change the number/coordinates if required then
press the Menu Select button directly below OK once.
• Press to move one space to the left.
• Press to move one space to the right.
• Press the Menu Select button directly below DEL to delete any unwanted characters.
• Press the Menu Select button directly below CNCL to return to the previous screen
7 Press the Menu Select button directly below OK once complete setting up the new Home or
Destination.
One of the following scenarios occurs:
• The display shows [HOME] UPDATED and the radio returns to the Waypoints main screen.
• The display shows [DESTINATION] UPDATED and the radio returns to the Waypoints main
screen.
6.16.10
Deleting a Single Saved Waypoint
Prerequisites: Ensure your radio shows the current location on the screen.
Procedure:
1 Press the Menu Select button directly below OPTN.
2
or to WAYPOINTS and press the Menu Select button directly below SEL .
The display shows a list of waypoints.
3 Perform one of the following actions:
•
or to the required saved waypoint, and press the Menu Select OPTN. or to Edit name
and press the Menu Select button directly below Del.
• Press the Menu Select button directly below Del.
4 The display shows <WAYPOINT NAME> CONFIRM DEL?.
5 Press the Menu Select button directly below YES to delete the waypoint or press the Menu
Select button directly below NO to return to the Waypoints main screen.
The display shows <WAYPOINT NAME> DELETED .
6.16.11
Deleting All Saved Waypoints
Prerequisites: Ensure your radio shows the current location on the screen.
When and where to use:
NOTICE: You cannot delete any of the preprogrammed waypoints.
Procedure:
1 Press the Menu Select button directly below OPTN.
6875947M01-HM
Advanced Features
86
To Next Page
Loading...
Need help?
General
