80
Trunking Operation
• To delete characters, press the Mode down rocker switch
to move backwards over existing characters.
When the last character on the display has been erased,
press the Mode down
rocker switch again to leave the
name-edit mode, without making any changes, and begin
the procedure again at step 2.
5 To save the changes, press and hold .
6 Repeat steps 2 through 5 until you have modified all the desired
names,
OR
Do one of the following:
• Press to return to normal radio operation.
OR
• Press to return to normal Call Alert operation.
Sel
HOME
Page