Motorola Astro XTL 5000 User Manual

70
Conventional Radio Features
Storing a Unit ID Number in the List
(W7 and W9 Control Heads Only)
The Selective and Call Alert page features share the same prestored
list of units’ IDs.
1 Press and hold , , or to review
the Call ID list.
The Call indicator flashes and a high-pitched tone sounds.
2 Press the Mode rocker switch to locate the list member you
want to change.
3 Press to select the unit ID store function.
4 Enter the new unit ID number on the keypad.
Note: If you make an error, press the Mode down
 rocker switch
or #Del to erase each incorrect digit.
5 When all the digits of the ID are entered, press to
store the new ID.
6 Repeat steps 2 through 5 until all the desired IDs have been
entered.
OR
Do one of the following:
• Press the to return to normal radio operation.
OR
• Press to return to normal Call operation.
Call Page 2Pge
Sel
Sel
HOME
Call

Motorola Astro XTL 5000 Specifications

General

Brand	Motorola
Model	Astro XTL 5000
Category	Radio
Language	English