ASTRO XTL 5000 Digital Mobile Radio with W4, W5, W7, and W9 47
General Radio Features
Editing a Name in the List
(W7 and W9 Control Heads Only)
1 Press and hold to enter Phon ID list programming.
The Phon indicator flashes and a high-pitched tone sounds.
2 Press the Mode rocker switch to locate the list member you
want to change.
OR
Use the numbered keys to go immediately to the location of a
member in the list. For example, press 2 to go to the second
member in the list; press 1 and 0 to go to the tenth member in
the list, and so on.
3 Change the characters or numbers using any of the numeric
keys (0 through 9) and special function keys
(
*, #).
Note: The maximum number of characters permitted in a text line
is 8 for W7 Control Head and 11 for W9 Control Head. If you
try to add too many characters, you will hear a low-pitched
tone.
To edit, do any or all of the following:
• To enter a character at the blinking cursor, refer to the table
on page 49.
Press the key of the desired character the number of times
shown in the table. For example, to enter the character C,
press the 2 key three times.
• To leave a space in the text, press the Mode up
rocker
switch to move the blinking cursor to the next character
position, and then enter the character.
Phon
To Next Page
Loading...
Need help?
General