2205Q2JE-HO-S6-N_2020.01.
Chapter 7 Related Documents
SCV-series Screw Compressor 7.2 Parts Configuration Table 160V**
7-9
446
Vi Square Washer, Teflon Bushing CS44600-160VD 1
Teflon Bushing CS44800-160VD 1
449
Thrust Washer CS44900-160VD 2
450
O-ring PA11-025 JIS B 2401 P25 2
451
O-ring PA11-025 JIS B 2401 P25 1
452
Hexagon Socket Head Cap Screw NB35404-010 M4 x 10 1
453
Hexagon Nut NC720-24 M24 1
454
Hexagon Socket Head Cap Screw NB35404-020 M4 x 20 1
455
Spring Washer, Hexagon Socket Head Cap
Screw
ND330-04 M4 1
456
Hexagon Socket Head Cap Screw NB35405-010 M5 x 10 2
458
Plug NF06-004 R 1/8 4
459
Plug NF06-015 R 1/2 1
522
Domed Cap Nut NC921-24 M24 1
523
O-ring PA11-025 JIS B 2401 P25 1
533
Spring Washer, Hexagon Socket Head Cap
Screw
ND330-04 M4 1
605
Plug NF06-015 R 1/2 1
607
Plug NF06-008 R 1/4 1
607
Plug NF06-008 R 1/4 1
607
Plug NF06-008 R 1/4 1
680
Conical Spring Washer, Vi Adjusting Rod ND160-024 M24 1
680
Conical Spring Washer, Vi Adjusting Rod ND160-024 M24 1
701
Backup Ring PBP11-045 1
The part code of the O-ring is the one assigned to NBR which is standard material.
When the material of the O-ring is other than NBR, a different part code is used for
each material.
If you are using O-rings made from other than the standard material, please contact
MAYEKAWA when placing an order.
The Code No. of parts shown in parentheses below is applied to the product until the
end of November, 2014:
(P/N 120 Unloader Indicator Assembly, P/N 125 Micro-Switch, P/N 129 Potentiometer)
For the Code No. of new type indicator part, refer to the separately dedicated
Instruction manual for it.