mycom SCV Series User Manual

2205Q2JE-HO-S6-N_2020.01.
Chapter 3 Installation
SCV-series Screw Compressor 3.2 Installation Works
3-3
3.2.4 Preparation for Installation
 Installation Space
Secure sufficient working space for easy operation, cleaning, maintenance, and inspection.
 Illumination
Prepare illumination devices which allow easy operation, cleaning, maintenance, and inspection.
 Ventilation
If natural ventilation is insufficient, install ventilation fans according to the relevant regulations.
 Connecting Port of Compressor
Figure 3-1 Connecting Port of Compressor
Table 3-1 Connecting Port of Compressor
No. Item
Compressor Model
160V**
200V**
250V**
320V*D
1
Connecting port for liquid injection 2
Rc3/8
Rc1/2
Rc1/2
Rc3/4
2
Connecting port for liquid injection 1
MYK 20A
MYK 25A
MYK 32A
MYK 50A
3
Oil supply port for F rotor side bearing
Rc1/4
Rc3/8
Rc3/8
MYK 20A
4
Discharge gas outlet (type D)
MYK 100CD
MYK 125CD
MYK 150CD
MYK 200CD
Discharge gas outlet (type G)
MYK 100A
MYK 125A
MYK150A
-
5
Unloader control (increase)
Rc3/8
Rc3/8
Rc3/8
Rc3/8
6
Suction gas inlet
MYK 125A
MYK 150A
MYK 250A
MYK 350A
7
Lubricating oil main supply port (journal)
Rc1/2
MYK 20A MYK 25A MYK 40A
8
Economizer connecting port
MYK 25A
MYK 32A
MYK 50A
MYK 80A
9
Plug for (oil return)
-
-
-
-
10
Control wiring connector for indicator
-
-
-
-
11
Unloader control (decrease)
Rc3/8
Rc3/8
Rc1/2
Rc1/2
12
Oil drain port
Rc3/8
Rc1/2
Rc1/2
Rc1/2
13
Connecting port for oil injection
Rc3/8
Rc1/2
Rc1/2
MYK 25A

mycom SCV Series Specifications

General

Brand	mycom
Model	SCV Series
Category	Air Compressor
Language	English