2205Q2JE-HO-S6-N_2020.01.
Chapter 2 Compressor Specifications and Structure
SCV-series Screw Compressors 2.3 Compressor Specifications
2-5
Table 2-4 Standard Specifications of SCV-series 250V*G
Item
Working fluid (Refrigerant)
Ammonia, Hydro Fluoro Carbon and Other
1350 1260 1180 1120
Capacity control (Actual load)
10 to 100
CCW viewed from motor
Swept volume
-1
3
3370 2840 2380 1900
-1
3
2800 2360 1980 1580
MYK 150A
Main oil supply port (Journal)
MYK 25A
Oil supply port for side bearing of F rotor
Capacity control
Note 1: Unless otherwise noted, the pressure unit MPa represents the gauge pressure in this manual.
Note 2: MYK flange is the standard flange for MYCOM single screw compressor.
Table 2-5 Standard Specifications of SCV-series 320V*D
Item
Working fluid (Refrigerant)
Ammonia, Hydro Fluoro Carbon and Other
2640 2480 2240
Capacity control (Actual load)
10 to 100
Swept volume
-1
3
5700 4760 3820
-1
3
4740 3960 3170
MYK 350A
MYK 200CD
Main oil supply port (Journal)
MYK 40A
Oil supply port for side bearing of F rotor
Capacity control
Note 1: Unless otherwise noted, the pressure unit MPa represents the gauge pressure in this manual.
Note 2: MYK flange is the standard flange for MYCOM single screw compressor.
To Next Page
Loading...
Need help?
General
