National Instruments 636 Series User Manual

© National Instruments | 2-5
X Series User Manual
Note (NI 6346/6349/6356/6358/6366/6368/6374/6376/6378/6386/6396
Devices) Simultaneous MIO X Series devices do not support SCC.
Note (NI 6345/6355/6365/6375 Devices) SCC is supported only on Connector 0.
BNC Accessories
You can use the SHC68-68-EPM shielded cable, to connect your DAQ device to the BNC
accessories listed in Table 2-1.
Table 2-1. BNC Accessories
BNC Accessory Description
BNC-2110 Provides BNC connectivity to all analog
signals, some digital signals, and spring
terminals for other digital signals
BNC-2111
*
Provides BNC connectivity to
16 single-ended analog input signals,
two analog output signals, five DIO/PFI
signals, and the external reference voltage
for analog output
BNC-2120 Similar to the BNC-2110, and also has a
built-in function generator, quadrature
encoder, temperature reference, and
thermocouple connector
BNC-2090A Desktop/rack-mountable device with
22 BNCs for connecting analog, digital, and
timing signals
BNC-2115
†
Provides BNC connectivity for
24 differential or 48 single-ended analog
inputs for connectors 1, 2, or 3 of the
NI 6345/6355/6365/6375 devices. This
leaves 8 differential or 16 single-ended
analog inputs inaccessible on
connectors 1, 2, or 3. Provides BNC
connectivity for
24 differential analog inputs for connector 1
of the NI 6349 device.
*
The BNC-2111 cannot be used with NI 6356/6358/6366/6368/6374/6376/6378/6386/6396 SMIO
X Series devices.
†
The BNC-2115 can only be used on connectors 1, 2, or 3 of NI 6345/6355/6365/6375 devices and
connector 1 of the NI 6349 device.

National Instruments 636 Series Specifications

General

Brand	National Instruments
Model	636 Series
Category	Data Loggers
Language	English