National Instruments cRIO-904 Series User Manual

What to Use
• cRIO-904x
• M4 screws, user provided, which must not exceed 8 mm of insertion into the cRIO-904x
– x4 for 4-slot models
– x6 for 8-slot models
Figure 18. Mounting the 4-slot cRIO-904x Directly on a Flat Surface
1
2
3
30 | ni.com | cRIO-904x User Manual

National Instruments cRIO-904 Series Specifications

General

Brand	National Instruments
Model	cRIO-904 Series
Category	Controller
Language	English