To Next PageTo Next PageTo Previous PageTo Previous Page
Need help?Do you have a question about the National Instruments RMC-8356 and is the answer not in the manual?
General| Brand | National Instruments |
|---|---|
| Model | RMC-8356 |
| Category | Controller |
| Language | English |
Instructions for inspecting the shipping container and the RMC-8356 for damage upon arrival.
Lists the items included in the RMC-8356 kit for initial setup.
Provides a summary of the RMC-8356 controller's features and capabilities.
Highlights the main performance aspects of the RMC-8356 for controlling PXI systems.
Details the specifications of the RMC-8356's mainboard components.
Outlines the power management capabilities supported by the RMC-8356.
Explains the function of each LED indicator on the RMC-8356 front panel.
Provides a description of the RMC-8356 front panel and its features.
Information on upgrading the memory modules for the RMC-8356.
Describes the software packages provided by National Instruments for the RMC-8356.
Crucial safety precautions and warnings to observe during installation and operation of the RMC-8356.
Discusses factors affecting chassis cooling and proper ventilation for the RMC-8356.
Step-by-step guide for connecting devices and powering on the RMC-8356.
Details the procedure for establishing a proper safety ground connection for the RMC-8356.
Instructions for connecting the RMC-8356 to an AC power source.
Introduction to the AMIBIOS Setup utility for configuring the RMC-8356 motherboard.
Describes the primary configuration screen within the AMI BIOS setup utility.
Provides details about the system's installed memory, including total size and speed.
Covers advanced system settings accessible through the BIOS setup utility.
Detailed settings for CPU performance, features, and states.
Configuration for Intel Virtualization Technology for enhanced I/O management and security.
Settings for managing CPU temperature and thermal behavior.
Configuration options for the system's chipset.
Settings related to the system's graphics display configuration.
Settings for configuring SATA controllers and drives.
Configuration for PCI Express, PCI, and Plug and Play devices.
Configuration settings for the Super IO chip and its logical devices.
Settings for Intel Active Management Technology (AMT).
Configuration for serial port console redirection.
Enables console redirection for Emergency Management Services (EMS).
Advanced Configuration and Power Interface settings for system power management.
Configuration settings for trusted computing and security devices.
Settings for configuring network interface controllers (NICs).
Configuration settings for system event logging.
Configuration settings for Intelligent Platform Management Interface (IPMI).
Configuration settings for system security features.
Configuration settings for the system's boot process.
Options for saving changes, exiting the BIOS setup, or restoring defaults.
Lists beep codes indicating POST errors and their meanings.
Procedures for reinstalling or recovering the operating system.
Guidelines for cleaning the RMC-8356 chassis.
Instructions for installing the RMC-8356 into a server rack.
Procedures for sliding the server chassis into the installed rack rails.
Instructions for installing the RMC-8356 into a Telco type rack.
Describes the various I/O connectors located on the rear panel of the RMC-8356.
Details the various USB connectors and headers on the RMC-8356.
Describes the VGA and DVI video output connectors.
Details the DisplayPort connectors for digital display output.
Information regarding MXI-Express connectors.
Answers common questions about the RMC-8356's LEDs, configuration, and basic operations.
Lists the devices from which the RMC-8356 can boot.
Explains how to set up the RMC-8356 to work with a PXI chassis.
Information on upgrading system memory, hard drives, and BIOS.
Provides troubleshooting steps for issues preventing the RMC-8356 from booting.
Troubleshoots screen display issues occurring after Windows boots.
Troubleshoots issues caused by a specific module not being in the chassis.
Lists the electrical specifications for the RMC-8356, including AC input.
Details the specifications of the RMC-8356's mainboard components like CPU, chipset, memory, and slots.
Lists the CPU specifications.
Details the specifications for the hard disk drive.
Lists the mechanical dimensions and weight of the RMC-8356.
Lists environmental operating conditions and specifications.
Lists the EMC standards the RMC-8356 meets.
NI's commitment to environmentally responsible manufacturing.
Describes the layout of the RMC-8356 motherboard with component locations.
Details the JF1 connector for control panel buttons and LEDs.
Describes connections on the motherboard and provides pinout definitions.
Details the two required power connections on the motherboard.
Describes the 4-pin fan headers and their compatibility.
Explains the function and use of motherboard jumpers.
Provides steps to clear the CMOS settings.
Describes the Watch Dog function and jumper settings.
Details the status indicated by various LEDs on the motherboard.
Information on upgrading the RMC-8356 memory capacity.
Sequence for installing DIMM modules in the motherboard slots.
Step-by-step instructions for installing DDR memory modules into the slots.
Step-by-step guide for installing DDR memory modules into the slots.
Step-by-step guide for removing DDR memory modules from the slots.
Information about upgrading and replacing hard disk drives.
Instructions for installing PCI expansion cards using the riser card.
Step-by-step guide for replacing the motherboard battery.
Details the system's cooling mechanism using counter-rotating fans.
Instructions for replacing a system fan if one fails.
Introduction to the Intel SATA RAID utility for managing RAID arrays.
Describes the types of Intel HostRAID configurations supported (RAID0, RAID1).
Steps to configure SATA RAID settings within the AMI BIOS.
Step-by-step guide to create a RAID0 volume for data striping.
Step-by-step guide to create a RAID1 volume for data mirroring.
Procedures for creating a recovery volume using RAID.
Steps to delete a RAID volume and its associated data.
Procedures to reset a RAID volume HDD to a non-RAID configuration.
Options for selecting a recovery volume for system restoration.
Steps to exit the Intel RSTe SATA Controller utility.
Overview of services and resources offered by National Instruments.
Resources available for technical support, including KnowledgeBase and forums.
Benefits of the Standard Service Program (SSP) membership.
Information on product compliance with European Directives for EMC and safety.
Table defining common symbols and their prefixes with corresponding values.
List of common symbols used in technical contexts.
Definition of Basic Input/Output System and its functions.
Definition of PCI eXtensions for Instrumentation.
