NetComm Wireless 4GM3W User Guide
DHCP Server
This Page allows you to change the Dynamic Host Configuration Protocol (DHCP) server settings on the 4GM3W. The DHCP
Server enables computers or devices connecting to the 4GM3W to automatically obtain their network configuration settings. By
default, the DHCP server is enabled.
DHCP Server Enable or disable the DHCP server.
IP Pool Starting/Ending Address
Whenever there is a request, the DHCP server will automatically allocate an unused IP address from the IP address
pool to the requesting computer. You must specify the starting / ending address of the IP address pool
Length of the DHCP lease time
Optional, this information will be passed to the client
Optional, this information will be passed to the client
Optional, this information will be passed to the client
Optional, this information will be passed to the client
Secondary WINS Optional, this information will be passed to the client
Optional, this information will be passed to the client
TFTP Server Name (Option 66)
Click Save to save these settings or Undo to cancel.
You can also check the DHCP client list by clicking the Clients List button.
Note: See the section “DHCP Client List” below for more information
The Fixed Mapping… button allows you to map a specific IP address to a MAC address.
Note: See the section “DHCP Fixed Mapping” below for more information
To Next Page
Loading...
Need help?
Operating Environment
Power
Ports & Interfaces
Weight and Dimensions
