NETGEAR GS724TPv2 Hardware Installation Guide

SFP ports for fiber connectivity
To enable fiber connections on the switch, SFP+ fiber ports accommodate standard
small form-factor pluggable (SFP) gigabit interface converters (GBICs, also referred to
as transceiver modules) for 1G fiber connectivity. GBICs are sold separately from the
switch.
The switch supports the following NETGEAR ProSAFE SFP short-reach transceiver
modules:
•
AGM731F SFP transceiver 1000BASE-SX, SFP short-reach multimode LC GBIC
•
AGM732F SFP transceiver 1000BASE-LX, SFP long-reach multimode LC GBIC
•
AGM734 SFP transceiver 1000BASE-T, SFP copper RJ-45 GBIC
For more information about NETGEAR SFP and SFP+ transceiver modules and cables,
visit netgear.com/business/products/switches/modules-accessories.
Reset button and Factory Defaults button
(model GS724TPv2)
Model GS724TPv2 provides a single-function Reset button and a separate, dual-function
Factory Defaults button.
Single-function Reset button (model GS724TPv2)
Model GS724TPv2 provides a single-function Reset button on the front panel so that
you can restart the switch. We recommend that you save the configuration before you
press the Reset button.
To restart the switch:
1. Insert a device such as a straightened paper clip into the opening.
2.
Press the recessed Reset button for more than one second.
During the restart process, the Power LED lights amber.
Hardware Installation Guide16Hardware Overview
24-Port Gigabit (Hi-Power) PoE+ Ethernet Smart Managed Pro Switch with 2 SFP Ports

NETGEAR GS724TPv2 Specifications

General

Brand	NETGEAR
Model	GS724TPv2
Category	Switch
Language	English