1
Introduction
This hardware installation guide complements the installation guide that came with your
switch and applies to the NETGEAR 24-Port Gigabit (Hi-Power) PoE+ Ethernet Smart
Managed Pro Switch with 2 SFP Ports and Cloud Management, model GS724TPv2 and
GS724TPP.
This hardware installation guide complements the installation guide that came with your
switch and applies the following NETGEAR Smart Managed Pro switch models:
•
GS724TPv2. 24-Port Gigabit PoE+ Ethernet Smart Managed Pro Switch with 2 SFP
Ports and Cloud Management
•
GS724TPP. 24-Port Gigabit Hi-Power PoE+ Ethernet Smart Managed Pro Switch
with 2 SFP Ports and Cloud Management
In this guide, both models are referred to as the switch.
The switch provides twenty-four Gigabit RJ-45 copper PoE+ ports with two dedicated
SFP fiber ports. Power over Ethernet (PoE) lets you provide power to PoE-capable
devices such as WiFi access points, VoIP phones, and IP security cameras so that you
do not need to use power supplies for those devices. The switch can supply up to 30W
PoE+ (IEEE 802.3at) to each port. The maximum PoE power budget across all active
PoE+ ports is 190W for model GS724TPv2 and 380W for model GS724TPP.
This chapter serves as an introduction to the switch and includes the following sections:
• Overview
• Management options
• Features
• Safety instructions and warnings
Note: For more information about the topics that are covered in this manual, visit the
support website at netgear.com/support/.
Note: For technical specifications, see the data sheet at
netgear.com/business/products/switches/managed. For switch documentation, visit
netgear.com/support/download.
5
To Next Page
Need help?
General