Enable and configure OpenVPN on the
router
You must enable OpenVPN and specify the OpenVPN service settings on your router
before you or someone else can set up a remote VPN connection using OpenVPN.
Note: After you configure OpenVPN on the router, make sure that the VPN configuration
files are installed on the remote clients. If you make changes to the OpenVPN
configuration on the router, the VPN configuration files that the remote clients use might
change, requiring new VPN configuration files to be downloaded and installed on the
remote clients.
To enable and configure OpenVPN on the router:
1.
Launch a web browser from a computer or mobile device that is connected to the
router network.
2.
Enter http://www.routerlogin.net.
A login window opens.
3. Enter the router admin user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Advanced Setup > VPN Service.
The VPN Service page displays.
5. Select the Enable VPN Service check box.
We recommend that you use the default TUN mode and TAP mode settings. However,
if you know that you need other settings, you can change the TUN mode and TAP
mode settings by doing the following:
•
To change the TUN mode service type, select the UDP or TCP radio button.
•
To change the TUN mode service port, type the port number that you want to
use in the field.
The default port number is 12973.
•
To change the TAP mode service type, select the UDP or TCP radio button.
•
To change the TAP mode service port, type the port number that you want to
use in the field.
The default port number is 12974.
User Manual143Use VPN to Access Your Network
Nighthawk AC2300 Cybersecurity WiFi Router Model RS400
To Next Page
Loading...
Need help?
General
Weight and Dimensions
