Note: If you use applications such as multiplayer gaming, peer-to-peer connections,
real-time communications such as instant messaging, or remote assistance, make sure
that Universal Plug-N-Play (UPnP) is enabled.
Add a port triggering rule
The router does not provide default services and applications for port triggering rules.
You must define a custom service or application for each port triggering rule.
To add a port triggering rule:
1.
Launch a web browser from a computer or mobile device that is connected to the
router network.
2.
Enter http://www.routerlogin.net.
A login window opens.
3. Enter the router admin user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4.
Select ADVANCED > Advanced Setup > Port Forwarding / Port Triggering.
The Port Forwarding / Port Triggering page displays.
5. Select the Port Triggering radio button.
The port triggering settings display.
6. Click the Add Service button.
The Port Triggering - Services page displays.
7.
Set up a new port triggering rule with a custom service or application by specifying
the following settings:
•
Service Name. Enter the name of the custom service or application.
•
Service User. From the Service User menu, select Any, or select Single address
and enter the IP address of one computer:
-
Any. This is the default setting and allows any computer on the Internet to
use this service.
- Single address. Restricts the service to a particular computer. Enter the IP
address in the fields, which become available with this selection from the
menu.
User Manual160Manage Port Forwarding and
Port Triggering Traffic Rules
Nighthawk AC2300 Cybersecurity WiFi Router Model RS400
To Next Page
Loading...
Need help?
General
Weight and Dimensions
