on the Wireless Setup page the is Up to 54 Mbps (see Change the WiFi Mbps
settings on page 94). For more information about WEP security, see Set up WEP
legacy WiFi security on page 92. However, we recommend that you use WPA2-PSK
[AES] security.
•
None. An open WiFi network that does not provide any security. Any WiFi device
can join the guest WiFi network. This is the default setting for the guest WiFi
network.
7. Click the Apply button.
Your settings are saved.
8. Make sure that you can reconnect over WiFi to the network with its new security
settings.
If you cannot connect over WiFi, check the following:
•
Is your computer or mobile device already connected to another WiFi network
in your area? If so, disconnect it from that WiFi network and connect it to the WiFi
network that the router provides. Some WiFi devices automatically connect to
the first open network without WiFi security that they discover.
•
Does your computer or mobile device display as an attached device?
If it does, it is connected to the network.
•
Are you using the correct network name (SSID) and password?
Control the WiFi radios
The router’s internal WiFi radios broadcast signals in the 2.4 GHz and 5 GHz ranges. By
default, they are on so that you can connect over WiFi to the router. When the WiFi
radios are off, you can still use an Ethernet cable for a LAN connection to the router.
You can turn the WiFi radios on and off with the WiFi On/Off button on the router, or
you can log in to the router and enable or disable the WiFi radios. If you are close to
the router, it might be easier to press its WiFi On/Off button. If you are away from the
router or already logged in, it might be easier to enable or disable them.
User Manual98Manage the WiFi Network
Settings
Nighthawk AC2300 Cybersecurity WiFi Router Model RS400
To Next Page
Loading...
Need help?
General
Weight and Dimensions
