EasyManuals Logo
Home>NETGEAR>Wireless Router>Nighthawk RS400

NETGEAR Nighthawk RS400 User Manual

NETGEAR Nighthawk RS400
184 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #82 background imageLoading...
Page #82 background image
A metric value of 1 works because the ISDN router is on the LAN.
The Private check box is selected only as a precautionary security measure in case
RIP is activated.
Set up a static route
To set up a static route:
1.
Launch a web browser from a computer or mobile device that is connected to the
router network.
2.
Enter http://www.routerlogin.net.
A login window opens.
3. Enter the router admin user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Advanced Setup > Static Routes.
The Static Routes page displays.
5. Click the Add button.
The page adjusts.
6.
In the Route Name field, type a name for this static route (for identification purposes
only).
7. To limit access to the LAN only, select the Private check box.
If the Private check box is selected, the static route is not reported in RIP.
8.
To prevent the route from becoming active, clear the Active check box.
In some situations, you might want to set up a static route but keep it disabled until
a later time. By default, the Active check box is selected and a route becomes active
after you click the Apply button.
9.
Enter the following settings:
Destination IP Address. Enter the IP address for the final destination of the route.
IP Subnet Mask. Enter the IP subnet mask for the final destination of the route.
If the destination is a single host, enter 255.255.255.255.
Gateway IP Address. Enter the IP address of the gateway.
The IP address of the gateway must be on the same LAN segment as the router.
Metric. Enter a number from 1 through 15.
User Manual82Manage Network Settings
Nighthawk AC2300 Cybersecurity WiFi Router Model RS400

Table of Contents

Other manuals for NETGEAR Nighthawk RS400

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the NETGEAR Nighthawk RS400 and is the answer not in the manual?

NETGEAR Nighthawk RS400 Specifications

General IconGeneral
NAT functionalityDouble firewall protection (SPI and NAT)
DoS attack preventionYes
VPN supportSecure access to your home network away from home
Cabling technology10/100/1000Base-T(X)
Networking standardsIEEE 802.11a, IEEE 802.11ac, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n
Ethernet LAN data rates10, 100, 1000 Mbit/s
Ethernet LAN interface typeGigabit Ethernet
DSL WAN-
WAN connection typeRJ-45
Wi-Fi bandDual-band (2.4 GHz / 5 GHz)
Wi-Fi standards802.11a, 802.11b, 802.11g, Wi-Fi 4 (802.11n), Wi-Fi 5 (802.11ac)
Top Wi-Fi standardWi-Fi 5 (802.11ac)
WLAN data transfer rate (max)1625 Mbit/s
WLAN data transfer rate (first band)600 Mbit/s
Product typeTabletop router
Product colorBlack
LED indicatorsPower
Flash memory128 MB
Internal memory256 MB
Processor cores2
Processor frequency1 MHz
USB 2.0 ports quantity1
Ethernet LAN (RJ-45) ports4
Power source typeDC
Package depth348 mm
Package width256 mm
Package height79 mm
Package weight1450 g
Number of products included1 pc(s)
Antennas quantity3
Cables includedDC, LAN (RJ-45)
Browser supportedInternet Explorer, Microsoft Edge, Google Chrome, Firefox, Safari
Windows operating systems supportedWindows 10, Windows 2000, Windows 7, Windows 8, Windows Vista, Windows XP
Master (outer) case width190 mm
Master (outer) case height298 mm
Master (outer) case length380 mm
Master (outer) case weight380 g
Weight and Dimensions IconWeight and Dimensions
Depth184.5 mm
Width285 mm
Height50 mm
Weight750 g

Related product manuals