To Next Page

To Previous Page

Specify Your Internet Settings

AC1750 Smart WiFi Router

Set Up an IPv6 DHCP Internet Connection

 To set up an IPv6 Internet connection with a DHCP server:

1. Launch an Internet browser from a computer or mobile device that is connected to the

network.

2. T

ype http://www.routerlogin.net or http://www.routerlogin.com.

A login window opens.

3. Enter the router user name and password.

The user name is admin.

The user name and password are case-sensitive.

The BASIC Home page displays.

4. Select ADV

ANCED > Advanced Setup > IPv6.

The IPv6 page displays.

5. In the Internet Connection T

ype menu, select DHCP.

The router automatically detects the information in the following fields:

• Router

’s IPv6 Address on WAN. This field shows the IPv6 address that is acquired

for the router’s WAN (or Internet) interface. The number after the slash (/) is the

length of the prefix, which is also indicated by the underline (_) under the IPv6

address. If no address is acquired, the field displays Not Available.

• Router

’s IPv6 Address on LAN. This field shows the IPv6 address that is acquired

for the router’s LAN interface. The number after the slash (/) is the length of the prefix,

which is also indicated by the underline (_) under the IPv6 address. If no address is

acquired, the field displays Not Available.

6. Select an IPv6 Domain Name Server (DNS)

Address radio button:

• Get Automatically

from ISP. Your ISP uses DHCP to assign your DNS servers. Your

ISP automatically assigns this address.

NETGEAR R6400v2 User Manual

Other manuals for NETGEAR R6400v2