NETGEAR R6400v2 User Manual

Specify Your Internet Settings
41
AC1750 Smart WiFi Router
The user name is admin. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select ADV
ANCED > Advanced Setup > VLAN / Bridge Settings.
5. Select the Enable VLAN / Bridge group check box.
6. Select the By bridge group radio button.
7. Select a W
ired Ports check box or a Wireless check box:
• If your device is connected to an Ethernet port on the router
, select a Wired Ports
check box that corresponds to the Ethernet port on the router to which the device is
connected.
• If your device is connected to your router
’s WiFi network, select a Wireless check
box that corresponds to the router’s WiFi network to which the device is connected.
Note: You must select at least one Wired Ports or Wireless check box.
You can select more than one check box.
8. Click the Apply button.
Your settings are saved.
Add VLAN Tag Groups
You can add VLAN tag groups to the bridge and assign VLAN IDs and priority values to each
VLAN tag group.
If you add a VLAN tag group to the bridge, packets sent between the device and the router’s
Internet port are not processed through the router’s Network Address Translation (NAT) or
firewall.
 To add a VLAN tag group:
1. Launch an Internet browser from a computer or mobile device that is connected to the
network.
2. T
ype http://www.routerlogin.net or http://www.routerlogin.com.

NETGEAR R6400v2 Specifications

General

Brand	NETGEAR
Model	R6400v2
Category	Network Router
Language	English