Reference Manual for the 108 Mbps Wireless Firewall Router WGT624 v3
Wireless Configuration 5-15
v3.0, December 2005
2. Enter a word or group of 8-63 printable characters in the Passphrase box.
3. Click Apply to save your settings.
How to Restrict Wireless Access by MAC Address
To restrict access based on MAC addresses, follow these steps:
1. Log in to the WGT624 v3 wireless router at its default LAN address of http://192.168.1.1 with
its default user name of admin and default password of password, or using whatever LAN
address and password you have set up.
2. Click the Wireless Settings link in the Advanced section of the main menu.
3. From the Wireless Settings menu, click Setup Access List to display the Wireless Card
Access Setup menu shown below.
4. Select the Turn Access Control On check box.
Note: When configuring the wireless router from a wireless computer whose MAC
address is not in the Trusted PC list, if you select Turn Access Control On, you
will lose your wireless connection when you click Apply. You must then
access the wireless router from a wired computer or from a wireless computer
which is on the access control list to make any further changes.
Figure 5-8
To Next Page
Loading...
Need help?
General
