Reference Manual for the 108 Mbps Wireless Firewall Router WGT624 v3
Advanced Configuration 7-5
v3.0, December 2005
After a computer has finished using a "Port Triggering" application, there is a "Time-out" period
before the application can be used by another computer. This is required because this Router
cannot be sure when the application has terminated.
Port Triggering Menu
The Port Triggering Portmap Table lists the current port triggering services:
• Enable—indicates if the rule is enabled or disabled. Generally, there is no need to disable a
rule unless it interferes with some other function, such as Port Forwarding.
• Service Name—the name assigned to this service.
• Service Type—either TCP or UDP
• Inbound Connection—indicates the type of inbound connection (TCP/UDP, TCP, or UDP)
and the port range.
• Service User—indicates who can use the service on the network.
Adding a new Service
To add a new service, click Add Service and enter the following data on the resulting screen.
1. Enter service name in the Service Name box (for example, the name of the application)
Figure 7-2
To Next Page
Loading...
Need help?
General
