Reference Manual for the 108 Mbps Wireless Firewall Router WGT624 v3
Advanced Configuration 7-17
v3.0, December 2005
• Private is selected only as a precautionary security measure in case RIP is activated.
Enabling Remote Management Access
Using the Remote Management page, you can allow a user or users on the Internet to configure,
upgrade and check the status of your WGT624 v3 wireless router.
To configure your router for Remote Management:
1. Select the Turn Remote Management On check box.
2. Specify which external addresses will be allowed to access the router’s remote management.
Note: Be sure to change the router's default configuration password to a very secure
password. The ideal password should contain no dictionary words from any
language, and should be a mixture of letters (both upper and lower case), numbers,
and symbols. Your password can be up to 30 characters.
Figure 7-9
Note: For enhanced security, restrict access to as few external IP addresses as
practical.
To Next Page
Loading...
Need help?
General
