84
3. Place the item on the scale
4. Press the then a label is printed.
5. The Weight Display is displayed ADD character. And the Unit
Price Display is displayed the number of sold item and the number
of the void. The Total Price Display is displayed Total Price. The
Alpha Display shows “SUB TOTAL”
6. If you want to add other items, Press
and go the step 1.
7. When you finished, Press
in SUB TOTAL view. If
at the Initial State, Press then the Alpha Display
shows “SUB TOTAL”.
8. When you are pressing in sub total view, the accumulated total
price is printed on label. Remove the item from the scale and
apply the label.
The X/Sub Total Key
The key acts like a label copier. In other words, it allows
yo u t o r e p e a t t h e s a me s a l e s t r a n s a c t i o n ma n y t i me s .
The key will not work when the Auto Lamp is on.
To use the X key:
1. Start from the Initial State.
2. Call up a PLU. Make sure that the Total Price > 0.00.
3. Press
, enter the number of labels you want, and press
.
4. The scale will issue the labels you requested.
To use the Sub Total key :
1. Make sure that receipt mode.
2. This is done in order for the scale to keep more accurate sales data.
3. The printing can be in Sub total view.
If at Initial State, Press
ADD
To Next Page
Loading...
General