89
Change & Tender Print (Receipt)
You can print change and tender on receipt.
To use Change & Tender function :
1. Start from the Initial State.
2.
Press in the SUB TOTAL view
.
3. Enter the price of tender & change from 0.00 to 999999.99.
4. Press
.
Multi User operation (Receipt)
You can have multiple operators in a store. The P3-3 operator data in
master scale is sent to slave scale. But the P3-3 operator data in slave
scale is not sent to master scale.
To use multi user :
1. Start from the Initial State.
2.
Press for choosing the receipt mode
.
4. Press Password.
5. Press
6. Choose the Multi user. Press
for assigning operators key.
8. Press the alpha key you want to assign, then .
Enter the operator number you wish to assign. Press
to save the new assignment and go to step 3.
9. Press
to go back to the Initial State.
If you are programming in master scale, the master scale send the
changed operator data to all slave scale. So the assigned
operators are recorded in all slave scale
Label / Receipt
To Next Page
Loading...
General