works with the Auto key. When on, it means that the
print mode; when off, it means that the scale is in
print will only print automatically whenever
the weight returns to gross zero.
The Save Lamp
works with the Save key. When on, it means that the
scale is in save mode; when off, it means that the scale is in auto-
clear will clear out the tare and price whenever the weight
returns to gross zero.
Printer & Label Installation
The NETS
has a high speed thermal printer that prints at 100 mm per
second (4” per second.) It has a heavy-
drawer that is used to load the thermal labels into the scale.
Make sure that the Power Switch is off. Pull on the cassette handle to
remove the cassette drawer.
Once you have removed the cassette drawer you may follow the
instructions shown on the large sticker labeled “Installation” on the
cassette mechanism.
Removal Labels:
When the printer runs out of labels:
1) Pull and remove the Pick-up Clamp (f). When you do so, some of
the backing paper may rip; this is normal. Remove the excess
collected backing paper from the Pick-up Clamp (f) and discard the
paper making sure NOT to throw out the clamp.
To Next Page
Loading...
General