Nice Robus 1000 User Manual

26
Manual movement and release: before carrying out this operation please note that release can only occur when
the leaf is stopped.
To lock: carry out the same procedures backwards.
Control with safety devices out of order: If the
safety devices are malfunctioning, it is still possible to
control the gate.
• Operate the gate control device (remote control or
key-operated selector switch, etc.). If the safety
devices enable the operation, the gate will open and
close normally, otherwise the flashing light flashes a
few times but the manoeuvre does not start (the
number of flashes depends on the reason why the
manoeuvre is not enabled).
• In this case, actuate the control again within 3
seconds and keep it actuated.
• After approximately 2s the gate will start moving in
the “man present” mode, i.e. so long as the control
is maintained the gate will keep moving; as soon as
the control is released the gate will stop.
If the safety devices are out of order the
automation must be repaired as soon as possi-
ble.
Replacing the Remote Control Battery: if your
radio control, after a period of time, seems not to work
as well, or not to work at all, it may simply be that the
battery is exhausted (depending on the type of use, it
may last from several months up to one year and
more). In this case you will see that the light confirming
the transmission is weak, or does not come on, or
comes on only briefly. Before calling the installation
technician try exchanging the battery with one from
another operating transmitter:
if the problem is caused by a low battery, just replace
it with another of the same type. The batteries contain
polluting substances: do not dispose of them together
with other waste but use the methods established by
local regulations.
Are you satisfied? If you wish to install another
automation system in your home, call your old installa-
tion technician and use Nice products. You will get the
services of a specialist and the most advanced pro-
ducts available on the market, superior performances
and maximum system compatibility. Thank you for rea-
ding these instructions. We feel confident that you will
be well satisfied with your new system: for any present
or future requirements, please contact your reliable
installation technician.
!
1 Slide the lock cover disc 2 Insert and turn the key clockwise.
3 Pull the release handle 4 Move the leaf manually.

Nice Robus 1000 Specifications

General

Brand	Nice
Model	Robus 1000
Category	Gate Opener
Language	English