Nikon COOLPIX S3200 User Manual

E19
Connecting the Camera to a Printer (Direct Print)
Reference Section
Connecting the Camera to a Printer
1 Turn off the camera.
2 Turn on the printer.
• Check printer settings.
3 Connect the camera to the printer using the included USB cable.
• Be sure that plugs are properly oriented. Do not attempt to insert plugs at an angle,
and do not use force when connecting or disconnecting the plugs.
4 The camera is automatically turned on.
• When properly connected, the PictBridge startup
screen (
1
) will be displayed in the camera monitor,
followed by the Print selection screen (
2
).
B If the PictBridge Screen is not Displayed
Turn off the camera and disconnect the USB cable. Set Charge by computer (E62) in the
camera’s setup menu to Off, then connect the camera again.
Print selection
1 5/05
201 2
12

Nikon COOLPIX S3200 Specifications

General

Sensor Resolution	16.1 MP
Optical Zoom	6x
Digital Zoom	4x
LCD Screen Size	2.7 inches
Type	Compact
Image Sensor	1/2.3-inch CCD
Aperture	f/3.5-6.5
Storage Media	SD/SDHC/SDXC
Movie Recording	Yes
Image Stabilization	Lens-shift
Max Video Resolution	1280 x 720
Battery Type	EN-EL19 Lithium-ion Battery
Lens Focal Length	4.6-27.6mm (35mm equivalent: 26-156mm)
Shutter Speed	1/2000-1 s; 4 s (when scene mode is set to Fireworks Show)
Weight	Approx. 128 g (4.6 oz) with battery and SD memory card

Summary

Parts of the Camera and Basic Operation

Parts of the Camera

Basic Steps for Shooting and Playback

Preparation

Steps for setting up the camera, including battery and memory card.

Shooting

Step-by-step guide to taking photographs with the camera.

Playback

Steps for viewing and managing recorded images.

Recording and Playing Back Movies

Recording Movies

Movie Playback

General Camera Setup

The Setup Menu

Overview of camera settings and customization options.

Technical Notes and Index

Maximizing Camera Life and Performance

Troubleshooting

Solutions for common camera problems and errors.