E64
The Setup Menu
Reference Section
Blink Warning
Specify whether or not the camera detects human subjects that have blinked
when shooting with face detection (A64) in the following modes.
• A (auto) mode (when Face priority (E30) is selected for AF area mode
option).
• Scene auto selector (A 40), Portrait (A40), or Night portrait (A41) is
selected for the scene mode.
B Note About Blink Warning
The blink warning does not function at continuous settings of Continuous, BSS, or Multi-shot 16.
Press the d button M z tab M Blink warning
Option Description
On
When the camera detects that one or more human subjects
may have blinked in an image captured using face detection,
the Did someone blink? screen is displayed in the monitor.
The face of the human subject that may have blinked when
the shutter was released is framed by a yellow border. Should
this occur, check the image and determine whether or not
another image should be captured.
See “Operating the Blink Warning Screen” (E65) for more
information.
Off (default setting) Blink warning is not enabled.
To Next Page
Loading...
Need help?
General
