20
Basic Steps for Shooting and Playback
Step 1 Turn the Camera On
1 Press the power switch to turn on the camera.
• If you are turning the camera on for the first time
after purchase, see “Setting Display Language,
Date and Time” (A22).
• The lens extends and the monitor turns on.
2 Check the battery level indicator and the number of exposures
remaining.
Number of Exposures Remaining
The number of images that can be captured is displayed.
• If a memory card is not inserted, C is displayed to indicate that images will be saved
in the camera’s internal memory (approximately 42 MB).
• The number of exposures remaining depends on the remaining capacity of the
internal memory or memory card, and the image quality and image size (image
mode) (A61).
• The number of exposures remaining shown in the illustrations may differ from the
actual display.
Battery level
indicator
Description
b Battery level is high.
B Battery level is low. Prepare to charge or replace the battery.
N
Battery
exhausted.
The camera cannot take pictures. Charge or replace the battery.
To Next Page
Loading...
Need help?
General
