Nikon Speedlight SB-700 User Manual

E–11
Functions
E
Bounce Flash Operation
Taking a picture with bounce flash
Set the mode selector
to [TTL].
Set the camera’s
aperture, shutter
speed, etc.
Refer to “Setting the •
aperture in bounce flash
operation.”
Adjust the  ash head
and shoot.
t Setting the aperture in bounce  ash operation
In bounce flash, there is a light loss compared with normal flash •
photography (with flash head adjusted to front). Therefore, a two- or
three-step wider aperture (smaller f-number) should be used. Adjust
according to results.
When the flash head is adjusted to other than the front position, •
the SB-700 LCD does not display the effective flash output distance
range indicator. To ensure correct exposure, first confirm the effective
flash output distance range and aperture with the flash head in the
front position. Next, set this aperture on the camera.

Nikon Speedlight SB-700 Specifications

General

Vari-Power	1/1 to 1/128
Type	Shoe Mount
Color Temperature Information Communication	Yes
LCD Panel	Yes
Guide Number	28 m/92 ft at ISO 100 (35mm)
Zoom Range	24-120mm
Flash Duration	1/1042 sec at full power
Exposure Control	i-TTL
Bounce Head	Yes, -7 to 90 degrees
Swivel Head	Yes, 180 degrees left or right
Power Source	4 x AA batteries
Weight	360 g without batteries
Recycle Time	2.5 sec (NiMH)
Flash Modes	TTL, Manual, Repeating
Wireless Operation	Yes; Commander and Remote modes