Nikon Speedlight SB-700 User Manual

H–1
Tips on Speedlight Care and Reference Information
H
H
Tips on Speedlight Care and Reference Information
This section explains troubleshooting, Speedlight care, speci cations
and optional accessories.
Troubleshooting
If a warning indicator appears, use the following chart to determine
the cause of the problem before taking the Speedlight to a retailer or
Nikon representative for repair.
Problems with the SB-700
Problem Cause Solution
0
The power cannot
be turned on.
The batteries are not
correctly installed.
Insert the batteries
correctly.
B-8
Battery power is weak. Replace the batteries. B-10
The  ash-ready
indicator does not
light up.
The standby function is
activated.
Press the camera •
shutter-release button
halfway.
Turn the SB-700 on.•
E-30
Battery power is weak. Replace the batteries. B-10
The effective  ash
output distance
range does not
appear.
The  ash head is not set
to the front position.
Set the  ash head to
the front position.
B-13
Aperture information has
not been received from
the camera.
Check camera settings. •
Detach and attach the •
SB-700 on a camera.
—
The SB-700 cannot
receive focal length
information from the
camera.
Turn the SB-700 and
camera off, and then
turn them on again.
—

Nikon Speedlight SB-700 Specifications

General

Vari-Power	1/1 to 1/128
Type	Shoe Mount
Color Temperature Information Communication	Yes
LCD Panel	Yes
Guide Number	28 m/92 ft at ISO 100 (35mm)
Zoom Range	24-120mm
Flash Duration	1/1042 sec at full power
Exposure Control	i-TTL
Bounce Head	Yes, -7 to 90 degrees
Swivel Head	Yes, 180 degrees left or right
Power Source	4 x AA batteries
Weight	360 g without batteries
Recycle Time	2.5 sec (NiMH)
Flash Modes	TTL, Manual, Repeating
Wireless Operation	Yes; Commander and Remote modes