C–5
Flash Modes
C
v When insuf cient ash output for correct exposure is
indicated
When the flash-ready indicators •
on the SB-700 and in the camera’s
viewfinder blink for approx.
3 seconds after a picture is taken,
underexposure due to insufficient
flash output may have occurred.
To compensate, use a wider aperture •
or higher ISO sensitivity, or move the
flash unit closer to the subject and
reshoot.
Underexposure due to insufficient •
flash output is indicated by the
exposure value (-0.3 EV to -3.0 EV)
on the SB-700’s LCD panel for
approx. 3 seconds.
i-TTL Mode
To Next Page
Loading...
