Nikon Speedlight SB-700 User Manual

Operation
B
B–7
Basic Operations
This section covers basic procedures in i-TTL mode in combination with
a CLS-compatible camera.
v Notes on continuous  ash photography
To prevent the SB-700 from overheating, allow it to cool down for at •
least 10 minutes after 15 times of continuous firing.
When continuous flash firing is repeated in quick succession, •
the internal safety function adjusts the recycling time by up to
15 seconds. If flash firing continues, the thermal cut-out indicator
appears on the LCD and all operations are suspended. (0E-31) Allow
it to cool down for several minutes to disable this function.
The conditions under which the internal safety function is activated •
differ depending on the temperature and the SB-700 flash output
level.

Nikon Speedlight SB-700 Specifications

General

Vari-Power	1/1 to 1/128
Type	Shoe Mount
Color Temperature Information Communication	Yes
LCD Panel	Yes
Guide Number	28 m/92 ft at ISO 100 (35mm)
Zoom Range	24-120mm
Flash Duration	1/1042 sec at full power
Exposure Control	i-TTL
Bounce Head	Yes, -7 to 90 degrees
Swivel Head	Yes, 180 degrees left or right
Power Source	4 x AA batteries
Weight	360 g without batteries
Recycle Time	2.5 sec (NiMH)
Flash Modes	TTL, Manual, Repeating
Wireless Operation	Yes; Commander and Remote modes