D–14
Wireless Multiple Flash-unit Photography
D
Quick Wireless Control Mode
Taking a picture in quick wireless control mode
1. Master flash unit setting (flash output level
ratios, flash compensation value and channel)
[Setting flash output level ratio of 1 : 2 and channel 1
(example)]
Press the [SEL] button to
highlight the ash output
level ratio of remote ash
unit groups A and B.
Set the ash output level
ratio to 1 : 2 with the
selector dial and press the
[OK] button.
The flash output level ratio can be •
set within a range of 8 : 1 – 1 : 8.
The flash function in one of the •
remote flash unit groups A and B
can be canceled.
Set the flash compensation value if •
necessary.
To Next Page
Loading...
