Nikon Speedlight SB-700 User Manual

H–3
Tips on Speedlight Care and Reference Information
H
Warning indicators
Warning indicator Cause Solution
0
Battery power weak
indicator appears.
All operations have
stopped due to low
battery power.
Replace the
batteries.
B-10
Thermal cut-out
indicator appears.
All operations have
been suspended
because the SB-700
has overheated
and could become
damaged.
Allow the SB-700 to
cool down.
E-31
Safety circuit activation
indicator appears.
All functions other
than the power
switch are inoperable
because of power
abnormalities.
Turn off the power,
remove the batteries,
and contact your
retailer or Nikon
representative.
—
The  ash-ready
indicator blinks after
 ring.
Underexposure may
have occurred.
Use a wider aperture
or move the  ash
unit closer to the
subject and reshoot.
C-5
C-15
D-28
The remote  ash unit
beeps for approx.
3 seconds.
Underexposure may
have occurred.
Use a wider
aperture, move the
 ash unit closer
to the subject or
change the position
of the  ash unit and
reshoot.
D-28
Troubleshooting

Nikon Speedlight SB-700 Specifications

General

Vari-Power	1/1 to 1/128
Type	Shoe Mount
Color Temperature Information Communication	Yes
LCD Panel	Yes
Guide Number	28 m/92 ft at ISO 100 (35mm)
Zoom Range	24-120mm
Flash Duration	1/1042 sec at full power
Exposure Control	i-TTL
Bounce Head	Yes, -7 to 90 degrees
Swivel Head	Yes, 180 degrees left or right
Power Source	4 x AA batteries
Weight	360 g without batteries
Recycle Time	2.5 sec (NiMH)
Flash Modes	TTL, Manual, Repeating
Wireless Operation	Yes; Commander and Remote modes