Nikon Speedlight SB-700 User Manual

D–9
Wireless Multiple Flash-unit Photography
D
Advanced Wireless Lighting Operation
Taking a picture with Advanced Wireless
Lighting
1. Master flash unit setting (flash mode, flash
compensation value and channel)
[Setting i-TTL mode and channel 1 (example)]
Set the mode selector to
[TTL].
In order to set the manual flash •
mode, set the mode selector to [M].
Press the [SEL] button
to select the master
 ash unit, choose a  ash
compensation value with
the selector dial, and then
press the [OK] button.
Set the flash output level if the •
flash mode is set to manual flash.
Repeat procedure
above to set the  ash
compensation values of
the remote  ash unit
groups (A and B).
Set the flash output level if the •
flash mode is set to manual flash.

Nikon Speedlight SB-700 Specifications

General

Vari-Power	1/1 to 1/128
Type	Shoe Mount
Color Temperature Information Communication	Yes
LCD Panel	Yes
Guide Number	28 m/92 ft at ISO 100 (35mm)
Zoom Range	24-120mm
Flash Duration	1/1042 sec at full power
Exposure Control	i-TTL
Bounce Head	Yes, -7 to 90 degrees
Swivel Head	Yes, 180 degrees left or right
Power Source	4 x AA batteries
Weight	360 g without batteries
Recycle Time	2.5 sec (NiMH)
Flash Modes	TTL, Manual, Repeating
Wireless Operation	Yes; Commander and Remote modes