Nikon Speedlight SB-700 - Distance-priority Manual Flash Mode; Taking a picture in distance-priority manual flash mode

C–13
Flash Modes
C
Taking a picture in distance-priority manual
flash mode
Press the [SEL] button to
highlight  ash-to-subject
distance.
Set the  ash-to-subject
distance with the selector
dial, and then press the
[OK] button.
The flash-to-subject distance can •
be set with the [SEL] button as
well.
The flash-to-subject distance varies •
depending on ISO sensitivity within
a range of between 0.3 m and
20 m.
When the flash-to-subject distance •
(
X
) appears on the effective flash
output distance range indicator
(bar), the SB-700 fires with
appropriate flash output.
Con rm the  ash-ready
indicator is on, and then
shoot.
Distance-priority Manual Flash Mode